exhaust

Hi Everyone , Planning to buy a Black Widow Low Level Full Exhaust System to my Honda CB650r 2019 year, In offficial shop my prefered Exhaust system is written that fiting only 2021-2023 years, But I read that the Engine changes seems not existing in 2019 year and 2021 version. Could you...

Hi, I bought a Termignoni complete exhaust system for my Cbr 650f 2016 and managed to install most of the parts. However when I tried connecting the O2 sensor I noticed it was slightly too short. I tried rerouting the cable but it was just too short (need less than 5cm more). What should I do...

Hey guys. Got a cbr650R 2023 model here. Just wondering if theres any way i can get my hands on a cat back exhaust for the bike. I don't really want to straight pipe the bike but i do want to get rid of the hideous heavy box at the end of the exhaust. Is it possible just to put the stock cat...

Hello everyone, I just picked up a 2016 650f for a decent deal. She's only got 2500 miles on her and is completely stock. I'm thinking about picking up an exhaust but was wondering if I will also need a flash or power commander after or if it will throw any codes? Not super familiar with these...

Hello guys, I was in Vehicle inspection with my bike that I bought used. It has aftermarket exhaust "Ixil X55" I think it's a full system. I didin't pass it because of the emissions "CO" in particular. Idle shows 2,3% the allowed norm is 0.5% and 2k rpm shows 2.8% allowed is 0.3%. There is to...

Hi all, Not sure if anyone had this problem. I mounted a BlackWidow low exhaust like this https://www.blackwidowexhausts.co.uk/cbr650r-2021-2023-de-cat-low-level-exhaust-system-230mm-round-carbon-silencer-48725-p.asp The issue is that I have an OEM underbelly pan and i noticed that close to...

I've ordered a full exhaust system from Yoshimura (R-77) and getting ready to install it. Any tips or suggestions on how to go about it that I should know beforehand? It's for a 2018 CBR650F. I've done a few systems before and they're pretty straight forward, but every bike is a little...

I got a quick question if someone can help me out. I got a 2023 cbr650r and I’m looking to buy a full akra exhaust that’s currently installed on a 2020 cb650r with about 15k km on it. Will it fit and what do I have to look out for when buying it.

Racefit provide an exhaust for the CBR1000RR-R (Fireblade), which isn't supposed to fit the CBR650R, however, I've seen videos of people with them together I did some research into whether or not the headers would be the same sizes between the CBR650R and the CBR1000RR-R, but can't find any...

Good evening guys and girls. I'm looking for used exhaust for my CB60R 2023, i really don't want to pay 1250€ for Akra and also not 450€ for Black Widow... If you have used good quality exhaust or know a place where to get i would be more than happy to know. I'm located Helsinki, Finland...

Just took off the Mivv system. Is the exhaust header supposed to look like that? It was installed last year.

As you can see by the pictures, somehow the threaded part snapped off. So no more putting the bolt back in. Should I find a way to plug it or leave it and just put the rubber grommet back on?

Hi everyone, I have encountered a problem while fitting a black widow system to my 2024 cbr650r. I’ve just noticed that the bike has 2 sensors going into the exhaust. The o2 sensor on the right side of the bike that goes into the pipe but there’s another sensor on the left side going into the...

I know titanium is supposed to blue but I noticed some brownish spots on the ends of the muffler and I was wondering if that’s normal? Google doesn’t seem to tell me much about it turning anything other than blue…

Hi all! I'd like to fit my bike with a low level BlackWidow short can (200mm), I have had a call with them to understand the legality of it all and since it's my first bike in the country I don't really know what the MOT test for it looks like. The company said that their silencers don't BSAU...

Hi all, Just bought a new exhaust for my 2022 CBR650R and I was thinking of installing it myself. The only issue I have is the guide does not have the torque specs I need to attach the headers to the block. Is it safe to say that the standard specs are correct for this (22nm) or because it is...

Reinstalling my akra exhaust and while removing the stock exhaust I have somehow managed to actually remove one of the mounting studs (92900-08022-3E) instead of just the the hex nut. Attempted to bolt it back in and this time just try to remove only the nut but no luck, the nut seems pretty...

Hi all! I am new to the world of aftermarket parts, and I would like to install a Black Widow exhaust to my CB650R 2019. Apart from noticing the insurer and make sure the exhaust is street legal, do I need to do else? I am quite confused on wheater there are better legal exhausts for this...

Hi everyone I own a CB650R 2023 and it’s time to upgrade my boy with an aftermarket silencer. 1 - What do you think of akrapovic silencers ? 2 - Does I need to do a remap after the new aftermarket exhaust is installed ? Thanks and lookin forward for your help.

Hi, I installed my exhaust system today with new gaskets. After torquing the bolts to the engine head, I noticed that exhaustpipe1-3 looked good (I can see the gasket is crushed underneath and overneath), but I'm unsure about 4 and whether I need to redo it. It seems that the exhaust pipe is a...