bar

I have some bar risers to fit to my cbr 650f does anyone have the torque settings for the clip on pinch bolts?

I’m new here got told to check this forum out because there’s a lot of helpful people around Over the last few days I was riding in heavy rain, and the next day an engine light popped up. I just bought an OBD2 reader, but the seller didn’t include the 4-pin plug so I can’t actually scan it yet...

Recently picked up a 2024 CBR650R w/ e-clutch. Out riding this morning slowed to a stop at an empty suburban T intersection. Nary a car in sight on a beautiful News Years Day morning. Literally deserted. Needed to regrip and pulled hand off throttle to adjust, little did I realize my glove had...

Hey guys, I looking at buying Evotech Barend weights and noticed that they have another version that looks a lot bigger and another for race. Not sure which one to buy or what the difference is. I should also mention it’s a 2023 cbr650r Canadian market

So for a bit of context I laid the bike down during a stunt lot day, bikes fine of course but one of the things that snapped was the bolt on the lower handle bar riser. Does anyone know where the best place to find a replacement is? The only place I found that has them has them on back order...

I have some Acerbis X-Road lever protectors on the way that I want to fit; mostly for aesthetics but also just in case I ever decide to do a track day. Now I understand that I will need to remove the inner bar weights for this to happen, so some questions: How much vibration difference will...

There is a small white button on the left handle bar is that my hazard? 2016 CBR 650F

Hi All, I have been looking for a passenger handle grip bar on a fuel tank, but no part is available in Amazon or Aliexpress. There are many of them for other bikes, however, I am not sure if that fits my CB650F 2018, I also could not find the drawing of the fuel tank lid to know if the handle...

2023 CB650R I removed the old weights, and bought a longer M6 screw from my local home improvement store. Then I used the bar ends in the link below with expanding sleeves from the mirror kit. The bar end adaptors create space where the throttle can’t be impinged by the bar end. The expanding...

Does anyone know where to get some nice black bar ends?

I got the OEM C spanner for adjusting the preload from a friend, but I don't have the extension bar for the spanner, which is referenced in the service manual. Without it, I found there is not enough leverage to turn the preload adjustment clip. So, I went the RevZilla. But, I did not find the...

Does anyone know where to get these silver ones bar ends and if they fit cb650R 2022 model? I know there on the cb1000r

I am going out on a limb here so don't hang me yet. The need to make a passenger more comfortable has arisen. She prefers a sissy bar. I couldn't care less but want another fun mod project for the 2021 cb650r. We are thinking a small 10-12' inch custom sissy bar. I currently have side tail...

I’m due delivery of my new CB650R Neo Sport and would be looking to rig it for towing a small trailer. As I don’t have the bike yet, I”m working from online media images. I’m looking at using the rear passenger foot peg mount points as well as another at each side to fit a fabricated support...

Hello All, I am desperate to get bar end mirrors on my 2021 CB650. I have read through all of the forums on here about the subject, and have derived that the solution is to purchase the Sato Racing inner weights. However, I have been unable to find a single site that still has them in stock. I...

Okay, finally got my sato weights, and mirrors showed up today from revzilla. While home with Covid I figured what better time to knock out the project. Removed the old weights (pita) and got everything ready only find the bolts from the mirrors are too big. No big deal, I can get different...

Hi All, I am looking for some wisdom. I need to remove my bar ends, but they just spin (even when grips and cloth used!) I don’t want to damage them as I wish to refit after my hot grips have been fitted. Is there any hond bike techs that can give some advice that will be very appreciated...

I absolutely love my CBR650F (especially since replacing the original tyres with Road 6s! 👍🏼) however, one thing really still bugs me regarding the bike and that’s the vibrations through the bars. I’ve added grip puppies and they have improved the situation greatly. However I still find I get...

Do these R&G bar end sliders really install in a matter of seconds? From my research here getting the bar end caps are a major difficulty.. my factory one is a little scratched touch the wall by accident so thought I would replace them with these...

Hello CB650R owners!!!! How are you? (hope you doing gooooooddddd!) I want to ask and get your help about Crash bar i got installed yesterday... After i left my garage i noticed that i feel strange vibrations on specific rpms. I bought and got installed the following crash bar...