I currently have both these frame sliders (https://tstindustries.com/womet-tech-frame-sliders-honda-cbr650r-cb650r-cb650f-cbr650f.html) and this engine guard (https://puig.tv/en/tuning-motos/frame-sliders/motor-cover-protectors?&bike=24111&location_iso=US) on my bike
Should I remove the frame...
Hi there, new to this forum. Recently purchased this 2014 cbr650f. I would like to remove these sliders. The seller did not have the OEM bolts. I’m curious if anyone can help me with the correct part numbers? I need the two smaller bolts and then the one large one. Pictures is both sides. Thanks!
Hello,
I have a CB650R 2024 model coming in in June. The dealer offered to install some Top Block frame sliders with 2 bolt points to help if (likely when but let's hope not) the bike is dropped. However I heard that this model can be quite buzzy if the engine mounts aren't torqued to specs...
Hi all, been thinking about replacing my sliders which are the single point mount kind since I've been reading here that there are instances where a simple slow speed tip over can crack the engine mount because of the single point of contact. Haven't seen those pics personally though, just read...
Hi all. I've never seen this type of engine guard. I'm currently on the hunt for proper engine guards, I'm not too keen on the GB racing type that cover the whole brown engine as I feel it ruins the aesthetics of the colors of the bike.
It seems like it's made of hard anodized aluminum. What do...
I got the EP HONDA CBR650R CRASH PROTECTION (2021+) from EvoTech.
I have installed it on my CBR650R 2023 today using official instructions and a few YouTube videos.
All fit really well but, Bobbin head (Part letter N)sticks out not equally from left and right.
From one side it sticks out for...
I recently bought a 2000 Honda CB650R and want to buy sliders for it. However, I'm not sure what kind of sliders to get (handlebar sliders? Fork sliders? Swing arm sliders? All of them), or what brand, and whether I can fit them myself or would be better getting a mechanic to do it (I have...
Hi, guys, i wondering installing frame sliders on cb650r (direct one bolt fixing thru engine front holder) will be more harm than protection? check picture - this is engine front fixing snapped! - to be honest i dont know if that was sliders fault, bought bike after accident. but it made me...
Hello,
I'm getting a CB650R, I'm a new rider into 650 I rode 150-200CC in the past. I would like to install engine and frame protection. I saw online there are two popular options, Frame Sliders and Engine Cage. Which one is more secure? Do they provide the same level of protection?
Do these R&G bar end sliders really install in a matter of seconds?
From my research here getting the bar end caps are a major difficulty.. my factory one is a little scratched touch the wall by accident so thought I would replace them with these...
whats up! everybody.
I just get a sliders for my 2016 cbr but i cant see where it goes i was tryn in different possition but i cant place it, can somebody showme?
pics for details
Just purchased a 2020 CBR650R and need some recommendations for frame sliders. I have also heard that some opt for engine covers. Would like some input! Thanks!
Wanting to get something that can take repeated low speed drops in moto gymkhana, keeping damage limited to the crash bars themselves. This looks pretty awesome, but it's only for CB 650. Another candidate I've found is R-Gaza crash bars. Anyone tried any R-Gaza stuff before?
Anyone have these installed? The bolt that holds the bobbin to the bracket does not have a torque spec and I have reached out to evotech with no feedback.
Are the frame slider bobbins meant to spin? How much did you torque them down by?
I have just recieved these crash protectors for my cbr, the fitting instructions say to not exceed 40nm of torque however the service manual says the torque setting for the bolt it is replacing is 49nm. Any suggestions as to what torque setting should be used here?
I would like to purchase some good quality frame sliders for my new bike and also a radiator guards.
If you guys have any recommendations, ill be more than happy to hear them!
Hello 👋 everyone.
Anyone know where I can find tail tidy and sliders in Australiaustralia for a 2021 CBR650R please.
Trying to avoid overseas orders if possible.
Thank you.
Hi all,
So I bought the CBR650R last month and am absolutely loving the bike - as much as lockdown and the weather has allowed me to ride it anyway!
I've been looking for crash protection for it but want something that looks good, performs well, and is reasonably priced and came across the...
Hi Guys, Quick Question, bought some Evotech Performance frame and axle sliders.
In the installation instructions of the EP Front Fork Spindle Bobbins the torque settings for the Spindle Nut B (replacement nut for the OEM spindle nut) says Max torque setting of 25Nm but the Honda manual says...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.