pcv

Hello, can anyone tell me if the PCV valve of the CB 650 R is integrated into the cylinder head cover? And if it is, how to eliminate it to leave the cranckcase breath for the atmosphere. Thanks.

Ive been in contact with Dynojet with months now and still no solution. I have a 2019 CB650r and purchased a PCV and quick shifter from dynojet. Ive gotten the quick shifter to work but cannot calibrate speed and gear within the PCV to utilize gear dependent kill times. After months of trial and...

Hi all, Just looking at a map tuned to a PCV that I was given and was told it ran lean at the low throttle % but fine up top. Looking at the map it seems about right being in the negatives down low but really positive up high. I have a restricted CB650F and hoping to derestrict using a PCV. I...

Hi everyone I was wondering if anyone running the same similar set up as mine could help me out with sending me a tune I can send to my bike via power commander. I am running the PCV, Full GP dominator short exhaust, K&N high flow air filter, O2 sensor delete and I may just go ahead and do a...

You can put this on my grave stone! “I will not pay 90 CAD for a stupid toggle switch “ Now that you know the level, any alternatives?!? Cheers Sam

Hello, I'm from Italy and own a 2021 cbr650r that is restricted for A2. I wanted to derestrict the bike, but I don't want to flash the ECU (so that I can easily restrict it again) I know there are a few ways to do that, but I'm not that well-informed on with is the way to go. (I know the prefix...

After reading the postings in the forum, I noticed there were a lot of questions related to performance tuning. So I decided to write this posting based on my experience tuning my own bikes and working with tuners at local shops. So you want to get your bike dyno tuned? Before you do, you need...

Super excited!!!!! Taking delivery of my CS racing exhaust system today. plan to fit this over the weekend along with a K&N air filter and radiator cover. Also installing a gear indicator, just need to decide where to mount it. Lastly i will be taking out some of the throttle free play...

Hey! So i'm getting my restricton removed by changing intake funnels and installing a PCV, completely without changing anything in the ECU. All i need now is a map to make the fuel mixture right that fits with the restricted ECU and unrestricted funnels. Anyone here who's done the same and has a...

powervision 3 for 2021 version is out https://www.dynojet.com/power-vision-3-21-honda-cb650-cbr650-pv3-16-17/ its a good product or is better to wait for Pcv

Hello all, Background: I am new to using a power commander/ modifying my bike. I recently installed the R77 Yoshimura Full Exhaust on my 2019 CB650R. Still with stock air filter. I was worried about running lean so I purchased the PCV and uploaded as close a map I could find to this setup (it...

Hey, Anyone know if the PCFC for the 650F model would work on a 650R? Have an old one left over from the 650F I recently sold. Since the PCV works for both models it would make sense, and when downloading maps for "650R" from dynojets website and loading it onto the software it says MAP 1...

Is it better to go with a power commander or a ECU flash on a cb650r

Hello there, the PCV is out of stock and i was asking myself if the PCV from the Honda CBR650F is the same as the PCV for the Honda CBR650R ? Thank you in advance!

Hey guys, I have a 2019 cb650r, I installed a K&N air filter and the PC5 so far. when the PC5 is not actually plugged in and with just the air filter the bike seems to run fine. However after I install the PC5 the bike just bogs down. I've tried the stock filter stock exhaust tune from dynojet...

Hi guys, I'm going to buy a used PC FC for cb 650 f 2014 and I'm going to mount it on my cb 650 r 2019. I've already seen that the product code is the same (DY-EFC16052) but I want be really sure about the compatibility between the two bikes model (I'm scared about software problem using the old...

Hi, I‘ve installed my Power Commander V today and now I‘m thinking about which Dynojet map would be the „best“ one for my actual setup. *I know that a tune will be the best* I‘m running an Akrapovic Euro4 (carbon tip) full system with catalytic converter and a stock air filter. I‘ve modified...

hi guys quick question i hope i didnt put wrong thread but I purchase cs racing system and they told me after install full exhaust you dont need to remap ECU which there is a store where I live they do remap on ECU but for the hondacb650f they told me they can't so I would like know if install...

Hi All, I’m new here so bare with me. I bought my bike at the end of last winter (Toronto, Canada). So far, I have the Full Akro Titanium Exhaust with Carbon Tip (Baffles in) - looking to remove the baffles, is it worth it? I also would like to add, upgraded intake funnels, power commander v...

Looking to upgrade my intake funnels and get a power commander V.