mount

I went on a roadtrip in the south of France last weekend with a friend, had a little (too much) fun on the bends, and lost grip on a right-hand bend. My front wheel exploded, the front brake lever, the spider and I fucked up the right side fairings, the brake pedal and the exhaust are bent...

I wanted a part to fill in the recess left if the fairings when you remove the OEM turn signals. so made one. I've posted the STL file on Printables for free. https://www.printables.com/model/1022400-cbr650f-blinker-flush-mount The issue is that the flush mount blinker goes all the way into...

Reinstalling my akra exhaust and while removing the stock exhaust I have somehow managed to actually remove one of the mounting studs (92900-08022-3E) instead of just the the hex nut. Attempted to bolt it back in and this time just try to remove only the nut but no luck, the nut seems pretty...

My bike just fell down on a frame slider, the bolt got bent and ate the thread when screwing it out. I want to helicoil the thread but it’s the left side that also has a bracket for the horn. Is it possible to loosen both bolts on both sides and tilt the engine a bit forward? 2,5 cm would be...

I have just fitted an Evotech satnav mount. A bit expensive but the only one I found that I liked that fits in the middle on the handlebars. Ram mount supplied by Tomtom either got in the way of the dash or stuck up at a crazy angle. I discovered that the Tomtom anti-theft device also fits if...

The exhaust mount washers are two different lengths on the left / right. On the left side, it seems to me that the exhaust is just loosely suspended due to the length of the washer. This got me wondering if I had mounted it wrong. In the 2021-2022 service manual they are represented in the...

Hello, is there any decent panniers that mount without issues? I see the sw motech rubs against paint and the shad seems to need part the fairing cut out. Something that just fits normally without issue or cutting would be ideal. I prefer hard panniers to soft but open to either for the right...

Hi, All! Has anyone found or bought a phone or GPS mount so the phone would site above the dash? I found exactly what I want, but for the CB1000R...

Hi - got a quadlock stem mount kit for my phone but struggling with getting the black stem cap off without feeling like I’m going to damage it! Any tips or tricks? Cheers

Hi guys, I have used the search, but I can’t find the answer that I’m looking for… Do any CB650R owners use the Evotech Performance Quadlock Mount for mounting their phone to the factory handlebar clamp? Having recently purchased the generic QuadLock Handlebar Mount Pro, along with the...

Good morning fellow enthusiasts! I’m currently trying to find out if there is any difference that anyone knows of to the mounting of mirrors on the CBR650R 2020 compared to the 2021 model. The reason I’m asking is because I’ve bought some fresh Rizoma mirrors, and to install them I need the...

I installed flush mount LED turn signals on my 2019 CBR650R. This setup will work for 2018-2020 model years and may work for similar models and other model years. I mounted the rear lights to a tail tidy I purchased from an Australian shop called Mustard Bikes (link below). The flasher relay...

Hi folks. Just a quick informal poll: where do you prefer to position your phone mount? Dead center or off to the side closer to the grips? Searching around online I see a lot of people do center, and in theory that's what I would prefer too, but I can't see how I can manage that on my CB...

Don't suppose anyone on here has fitted flush mounted turn signals to the CBR650F? looking to get rid of the bulky OEM ones but struggling to find an after market flush mount indicator specifically for this bike. any help?

Bike in question is my 2014 Honda CBR650F. I'm not sure if I'm missing a part or not, but I changed the Xenon bulb that was in the bike (from previous owner) and changed it to an LED bulb. LED light works and all is well. However, from any video I can find about installing a H4 headlight, they...

Suppose to sell my bike today (pending sale) so looking for quick response. Don't have time to search. Have integrated tail and flush mounted sides. Earlier the season, I removed my seat, black and blue wires below got caught in underside of seat and I pulled them out of the connector. Have...

See attached pics. Why is my shit blue on one side? I went back to view pics from when I first got it, and it was indeed blue then also. Suggestions? I bought it used last year with 1800km on it.

I've just realised that my left frame slider has disappeared after a ride out. Looking at it closely it appears that the bolt has snapped (still in there) what size are the bolts for the engine and any tricks extracting the half bolt that's still in there??

Hey does anyone know where I can find some nice flush mount turn signals to replace the stock ones for the 2021 cbr650r? thanks!

Hi, newbie here I will receive my CB650R 2021 in a few weeks. I would like to know if any one has a quad lock Fork Stem Mount for cellphone for their bike. If yes is it compatible? Thanks in advance...