Dash cam install

[Omen]

Hi all
New to the site
Cbr650r owner
I'm installing a dash cam
Can someone help I'm looking for the 12v wire that's controlled by the key so dashcam comes on and off by ignition
The dash cam is vsysto b2f

 

[shark650]

in the left side of air filter box you a 12v option connector. you need to remove tank to access it

 

[Omen]

Hi
Don't suppose you have a picture?

 

[Omen]

Sorry forgot to mention
The connections are a live, neutral and a single yellow wire to connect to ignition live

 

[Ive]

Hi all
New to the site
Cbr650r owner
I'm installing a dash cam
Can someone help I'm looking for the 12v wire that's controlled by the key so dashcam comes on and off by ignition
The dash cam is vsysto b2f

Sorry forgot to mention
The connections are a live, neutral and a single yellow wire to connect to ignition live

The always-hot 12V power (your "live"), is: red/blue
The ignition-switched 12V power (your yellow "ignition live"), is: red/yellow
The ground (your neutral), is: green, green/yellow, green/red, or green white - depending which wire you tap into - or chassis ground.

For the 12V positive wires, you can tap those anywhere between the key ignition switch up front, and the fuse boxes towards the back where they terminate. When installing my alarm, I tapped into them half-way and inside one of the the stock looms before covering it all up, to better conceal the wires and make it all look stock.