suspension

The front forks on my recently bought 2018 CB650F are set approx 12mm above the yolks (see picture). This excludes the top nuts. Is this normal? I’ve got the service manual but this is not specified that I can see. The reason I ask is that the bike sits very upright when on the side stand. I...

Hello. Maybe a silly question, but when cleaning front fork stanchions, I noticed the left one (maybe the damper side) seems not to be as dry as it was, despite I cannot say it´s leaking, otherwise I would know the answer. My bike is now 27KKm. How long in average the seals of these forks last...

I just missed out on a 21 with all the upgrades. There are 2 19s in my area but between 19-23 the prices seem so miniscule it seems much better deal to go for a 21+ with all the upgrades to the suspension/rake/lcd screen etc. I don't want to super low ball the 2019 owners but if I could take...

Hi there, I’ve just had a full Nitron suspension upgrade fitted to my 2021 RAK CB650R. The installation was completed at the Nitron workshop in Whitney Oxon and consisted of a rear shock with remote reservoir and Triple valve adjustable fork inserts. The set up was completed specifically for my...

Looking for some advice on suspension upgrades. Thinking of doing both the front forms in the form of an Andreani Cartridge kit and the rear shock, likely a YSS shock but not 100% decided yet. With the cost probably going to do one at a time rather than both together. Any advice on which will...

Finally got my front suspension sorted vi's a maxton sd25 cartridge kit fully adjustable for rebound, compression and preload in both legs and its very, very good! I have also ordered a rear shock due at the end of the month which is a nitron r3 with hpa and can't wait, wondering what other folk...

So, hello guys, I have been noticing this sound on my new cbr650r for a while and I am not sure whether it was there when I bought it new or not. It's still under 1000km so I am not expecting any mechanical issues anytime soon, but that noise is really annoying. I hear this noise every time the...

How’s it going everyone. Today I’m opening a discussion on Hondas claim that the Showa SFF-BP forks on 2021+ year model CBR650R are fully adjustable. I’m sure most of us think they aren’t adjustable at all, but when I thought I could remember reading somewhere that they were adjustable I went...

How do you know when you have the right amount of preload? I am 280lbs and I have it set to 9. The back end feels very rough when riding, but it squats when I accelerate. The bike also seems to be off balance. When I engine break, the bike tilts foward. Is this due to too much preload or not...

Hi all... Bought this 2016 model last December to commute to work, does the job and is comfortable, however the fork compression is way to squidgy.. Any recommendations for spring replacements? Past bike History. 2012 Yzf R125 2002 GSXR 750 2013 KTM 690 SMCR 2007 YZF R1 Looooong break in...

Does anyone know if the cartridge kit for 2019-20 CB650 will fit 2021 model? The only option I found was a kit from Ohlins and Andreani. https://www.xparts.net/en/shop/suspension/front-fork/10852/ohlins-nix30-street-cartridge-kit/honda/cb-650-r/2019-2020-e4/...

I have read all the forum threads on lowering kits and shock pre-load but still looking for this answer. I am a height challenged rider who would do anything to get just a half inch lower seat height so I can flat foot at a stop. The bike came with the shock set a five and just wondering if...

Hi guys, I've noticed this while looking at marketing brochure on Honda's website. Does anyone knows anything about this? Is this true, or just a typo in marketing material? No mention of anything similar in CBR650R brochure.

This week's mods are all about improving the bike's comfort: 1. Nitron NTR R1 rear shock - The roads are really cracked and bumpy here in Toronto. The bike feels so much better with this Nitron shock, I'm no longer afraid of bumps or potholes. Also feels super planted in the corners. 2. Bar...

Has anyone tried upgrading the stock rear suspension on the CB650r? The roads are really cracked and bumpy in Toronto and I'm trying to make the ride more comfortable by fitting a customized Nitron rear shock. They seem like a really premium suspension company on par with Ohlins. Does anyone...

Hi, According to the manual, the rear suspension default value is 3. I am dissatisfied with something. I'm 210lb, what is the optimal preload setting?

I find the back shocks are pretty bouncy at the factory settings. Any suggestions on what's the best setting for a heavier guy like me ? Also is is easy to set yourself ? Do you need a special tool ? thanks !

There have been some discussion recently on front suspension upgrades and selection of fork oils. Good explanation in this review of the differences between the 19-20 R & the 2021 R...

Hi All, Just picked up a Lust lowering kit for my CB650R but it has no fitting instructions. Has anyone got a copy they wouldn't mind photographing and sending to me please ? TIA.

Hi all, would you know whether I can adjust the seat Hight or lower the suspension. I really like the bike but I am a short ass and I was hoping to lower the suspension or customise the bike. I am 5' 4" 1.63 cm. Many thanks, Marcos.