help

hey guys! first time posting here. I recently swapped my OEM exhaust for an aftermarket exhaust on my 2018 cbr650f and I want to have my ECU flashed. Before I can get an appointment at my garage, they need my ECU number so that they know if they are able to do it or not. I saw in the manual...

Hello all. Long time reader, first time poster. I have a cbr650r 2021 less than 2000 miles. Yesterday whilst riding I noticed a yellow Mil light. Bike runs perfectly and everything works as should. Using the short, the DTC code I got was 13-3. (13 long blinks, 3 short). Does anybody know...

Hi All, I am looking for some wisdom. I need to remove my bar ends, but they just spin (even when grips and cloth used!) I don’t want to damage them as I wish to refit after my hot grips have been fitted. Is there any hond bike techs that can give some advice that will be very appreciated...

Hey guys! So I need some engineering suggestions here! I got the SW-Motech Pro Blaze saddle bags for my 2022 CB650r and I absolutely love them and the look on the bike! My problem is the rear fenders ends are pointy and the points are exactly where the saddle bags rest so any vibration during...

Hi folks, I hope you are all well. I am hoping to get your help to find the code for the Meter upper assey and the meter transparent plastic screen cover. Some how my meter case and meter screen was damaged and I am struggling to find what are that parts ref numbers. I have attached a few...

Good morning fellow enthusiasts! I’m currently trying to find out if there is any difference that anyone knows of to the mounting of mirrors on the CBR650R 2020 compared to the 2021 model. The reason I’m asking is because I’ve bought some fresh Rizoma mirrors, and to install them I need the...

Anybody ever install Womet frame sliders from TST on their CBR650F/R? I got them in today and found out that fairings need to be cut to fit them. I can't find any videos or pictures of these sliders even being fit on anything outside the CB650s...

I have a full system Akrapovic exhaust, but after every ride it gets discolored like this in this part specifically, a blue discoloration. Which as of now causes no problems asides from that other people who have the same exhaust don’t experience it to this degree. It goes away when I clean it...

So I just adjusted the valve clearances on my bike and went to put it back together, but for the life of me I can't get the timing chain back on the cam shaft sprockets despite the fact that taking it off in the first place was easy peasey. It seems like it needs to be a couple inches longer or...

Struggling to find a tyre inflator to fit under my cbr650r 2021 rear seat. Any recommendations would be appreciated Thank you

Hello i am trying to find the oem bolt that is placed on spedometer and keep the oem windsheild. If someone can help i would really appriciate it. I believe its 90125-MKN-D50 but bcs its not clear i would like a confirmation.

Hey guys, trying to install after marked light on the 21 cbr650r and so far nothing is going to plan. It seems the wiring layout is completely different to the 2019 - 20 model as far as I can tell, which makes it awkward because that's all i have. Anyway I've solved the non standard flasher...

I recently had a Austin Racing de-cat Gp1R system installed, however i don’t know if it leaning out or not, I see guys online revving out to 12k without issues, but mine breaks up/hits a limit at 10,800, any ideas? Bike isn’t remapped and has no other performance mods

Hi guys, First of all, motorcycle noob here so my knowledge is extremely limited and I would be very grateful for any help. I bought my motorcycle at a dealer, and it already had these R&G frame-sliders installed, mounted to the engine basically. Somehow while driving, one of them fell off. I...

Honda CBR650F Hive mind I need help please 🏍️ We started fitting an HM pro quickshifter then realised my bike wouldn't start - it turns over and i can hear the fuel pump prime so stopped and have been going through possible causes, I've put a new battery on it today just in case but only turns...

Hi I have lowered a few bikes with dogbones without issues before but with the CBRf I have the lust bushing type thing to lower it and have the rear shock off and have 2 different kinds of car strut spring compressors one set kinda works but not in a safe manner, I've ordered motorcycle type...

I have unscrewed the three bolts that bolster the plastic guard to the swingarm, but the last one(in red circle) is scary tight and it's even got the marking on its head which makes it look even more important. And unlike the other three, this one goes into a metal part. I have already mauled...

Happened yesterday. I was cruising right along without a care in the world when suddenly I lost power and heard a loud "pop". Luckily I was just passing an off ramp so I swerved onto the ramp and basically coasted to a stop a couple hundred yards away. Bike was smoking pretty good from what I...

I’m in the middle of blanking my pair valves on my 2019 CB650R Tanks off, filter housing off etc. I can now see where the valves are located, further forward than I had thought. I realise there is a thread by Aaron for this, but I can get no write up showing, just around ten pictures, which...

Hi. I’m new to this group. Got my 650F delivered this morning. Currently on an R125 got my test next Friday. Anyway took my bike on a little test run and dropped her :( I’ve got R&G sliders which took most of the hit but the bronze bit is scratched I’m gutted. How stupid. I went to turn around...