Search results

The obd2 adapter finally came and when I try to read the codes, and error message comes up, idk if it's my obd2 scanner or cable or is there something wrong with my ecu? Yes the scanner works I use it on other cars

So I put new fresh gas same thing. I do notice now cylinders light up when I have the throttle open slightly or wide open. I also notice that the stator and flywheel it's what is being called has some rub marks. Like at one point it was hitting. I'll test the crank sensor next. seems like it...

Thank you I have downloaded something similar to this one. I'll go over it see if any difference

I wont, idk man last night I try to show my friend with it connect it doesn't spray but I was proven wrong. So it did spray.. its like intermittent

Ok so i notice something new, I don't see the injectors spray but when I disconnect the tps wire connector it starts to spray fuel,. So I tried to remove the tps sensor and I can no screw driver type or socket does anyone know how to remove it? I'm about to do a continuity test on the wires next

Yes I have battery charger said is full

When I open the throttle and hit the crank i see the injectors spray gas and the valves are wet i just can't tell if it reaches the cylinders. When I try to WOT and crank it does make a different sound kinda like pop as it wants to ignite. I bought new spark plugs still the same I'll put in new...

No I don't know what that is or how to

So I did another outside spark plug test as it lights up I notice spark on the side of the spark plug is that bad spark plug or bad coil?

Dry spark plug I checked only one

Yes the kill switch works properly when turn on you hear fuel pump prime and off will it won’t crank. I’ll check the spark plugs if wet or dry. Yeah the ECU is weird because like I said connected or not it still cranks. Fuel color looks good for gas, doesnt look like water is in there but I...

Don you recommend a code reader?

Does oil level matter? The oil light it on as I crank it goes away then comes back when I stop cranking

From what I was told it hasn't been running for a year, but if I remember correctly the gas is a month old. I got the bike as is didn't pay much for it figure it would be a good project but it's turning out to be a tough one. The person that I got it from did spark plugs, coils, starter relay...

well I have a 2015 it cranks but wont start, fuel pump works, fuel injectors are working, new spark plugs and coils, it has spark, bank angle sensor works, starter works, battery is fairly new, starter relay works, weird thing is when I unplug the ecu it still cranks but also wont start sounds...